|
Product Details:
Payment & Shipping Terms:
|
Measuring Range: | -19.9℃ To 70℃ Or -3.8℉ To 158℉ | Humidity Range: | 10%~99%RH |
---|---|---|---|
Display Resolution: | 0.1℃ Or 0.1℉ | Material: | ABS |
Features:
1. 3 channels of RF temperature humidity signal to the receiver
2. Dial display for the comfort level
Specification :
Indoor humidity is less than 34, showing left first pointer
Indoor humidity in 35~40, display second pointers
Indoor humidity in 41~55, display third pointers
Indoor humidity in 56~64, display fourth pointers
Indoor humidity in 65~99, display fifth pointers
(1)Receiver:91.5g
(2)Remote sensor:52g
(1)Receiver:110*80*25mm
(2)Remote sensor:90*60*28mm
Instructions:
1.Power on & signal match :
(1)Take down the backside battery case, and install two AAA batteries.
(2)3 minutes for signal match when power on, antenna symbol will flicker by 1HZ
(3)Signal match : each time the receiver and remote sensor power on, there will be 3 minutes for signal match, if the receiver can not get the signal from the remote sensor after 3 minutes, they will stop match for one hour (only if take off the battery and power on once again), and then after one hour they will match again for 3 minutes; during the stopped matching period, the “CH”symbol will flicker. If the signal disappeared, they will start signal matching again, once match successfully, the new CH signal will replace the current CH.
(1)Receiver:
①CH:press CH to change the channel, ordered by CH1→CH2→CH3→CH1.
②C/F:press C/F to change the display of degree centigrade & Fahrenheit
③MAX/MIN:press this button to check the max and min temperature record.
④ON/OFF:power ON / OFF
Notes:
1 This product is small-sized and easy to take. The following suggestions will help you to extend it’s lifetime.
2 Please keep the product dry. And avoid rain, moisture, and all kinds of fluids, or that will corrupt electronic components and circuits.
3 Let it away from high temperature. High temperature will shorten the life of electronic devices, and the lifetime of some plastic deformation; battery is also easy to burst.
4 The rough way of using may damage the internal circuit board.
5 Please do not disassemble this product by yourself.